Curtain Track End Cap Silver / Aluminum Color Fits Airstream 200784 200785

Curtain Track End Cap Silver / Aluminum Color Fits Airstream 200784 200785

Add a finished look to the ends of your Airstream’s aluminum curtain tracks.
Protect clothing, upholstery and yourself from the rough edges of your Airstream’s aluminum curtain tracks.
Stop your G-Tab Glides / T-Tab Glides from falling off the ends of your Airstream’s aluminum curtain tracks.

Made of beautiful, high-impact, ALUMINUM / SILVER color resin to match your beautiful “silver bullet” / (or your “tin can”)!

Installation tips here: https://youtu.be/7d0bWg66rro

These end caps are different.

Use Left Hand End Caps on the ends of the curtain tracks that are on your left hand side as you face out the window.
Use Right Hand End Caps on the ends of the curtain tracks that are on your right hand side as you face out the window.

Choose:
Right Hand Curtain Track End Cap to replace Airstream 200784
or
Left Hand Curtain Track End Cap to replace Airstream 200785
or
Pair (1 Left and 1 Right)

— Installation Tips —

Tools you will need:

• Screwdriver
• Drill with a bit that is a bit larger than the shaft of the end cap retaining screw

Installation:
Installation tips here: https://youtu.be/7d0bWg66rro
(Use appropriate caution and safety equipment!)

• 1) Loosen the end cap retaining screw and (if present) remove the old end cap or any debris.
• 2) Place the new end cap into the end of the Airstream curtain rail.
• 3) Tighten the screw gently as you apply pressure to the arm of the new end cap to mark the location of the drill hole. Only tighten the screw enough to mark the arm of the new end cap.
• 4) Drill a hole through the arm of the new end cap at the mark you made in step 3.
• 5) Make sure that all the curtain hooks are back in the curtain rail.
• 6) Place the new end cap into the end of the curtain rail.
• 7) Using back pressure on the arm of the end cap, gently screw the retaining screw back through the metal of the curtain rail support and into the new end cap. The screw only needs to be tight enough so that the end cap doesn’t slide out.